Ruijie RG-S2600G-I Series - Page 1128

CLI Reference VSU Configuration Commands
Configuration
Command
Mode
Global configuration mode
Usage
Guidelines
This command can only be executed in the VSU mode and cannot be used to remove the
configuration of the master device.
Configuration
Examples
#Remove the configuration of Switch 3.
Ruijie(config)# remove configuration switch 3
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A
session
Use this command to configure redirection to the console of the master or any device.
session { device sw_id | master }
Parameter
Description
Parameter
Description
device
Configure redirection to the console of the member device.
sw_id
Member device ID, in the range of 1 to 8.
master
Configure redirection to the master console.
Default
Configuration
N/A
Command
Mode
Privileged EXEC mode
Usage
Guidelines
This command can be used in VSU mode.
Configuration
Examples
#Configure redirection from the serial port console of the slave device 2 to the master console, and
then exit .
Ruijie-STANDBY-2#session master
Ruijie#exit
Ruijie-STANDBY-2
#Configure redirection from the master console to the device 2 console, and then exit.