Ruijie RG-S2600G-I Series - Page 1143

CLI Reference VSU Configuration Commands
Related
Commands
Command
Description
switch num
Specify a device ID in VSU
switch virtual domain
Specify the VSU virtual device ID.
switch number priority priority_num
Configure the priority of a switch in VSU.
show switch virtual
Check the domain ID, the ID and role of each
device.
Platform
Description
N/A
switch virtual aggregateport-Iff enable
Enable the local priority forwarding feature of AP in the VSU mode. The no form of this command is
used to disable the local priority forwarding feature, namely, to change into the cross-switch traffic
balancing mode.
switch virtual aggregateport lff enable
no switch virtual aggregateport lff enable
Parameter
Description
Parameter
Description
N/A
N/A
Default
Configuration
The local priority forwarding feature is enabled by default.
Command
Mode
config-vs-domain configuration mode
Usage
Guidelines
N/A
Configuration
Examples
#Enable the local priority forwarding feature of AP in the VSU mode.
Ruijie(config)# switch virtual domain 1
Ruijie(config-vs-domain)# switch virtual aggregateport-lff enable
Related
Commands
Command
Description
show switch virtual balance
Check the current traffic balancing mode.
Platform
Description
N/A