Ruijie RG-S2600G-I Series - Page 1190

CLI Reference Guide RSPAN Configuration Commands
Ruijie(config)# monitor session 2 source interface gigabitEthernet 1/2
Ruijie(config)# monitor session 2 destination remote vlan 7 interface
gigabitEthernet 1/3 switch
Ruijie(config)# monitor session 2 destination remote vlan 7 reflector-port
interface gigabitEthernet 1/1 switch
The following example configures the destination switch:
Ruijie(config)#monitor session 2 remote-destination
Ruijie(config)#monitor session 2 destination remote vlan7 interface
gigabitEthernet1/1 switch
Related
Commands
Command
Description
show monitor
Show mirroring session information.
Platform
Description
N/A
remote-span
Use this command to enable the remote port mirroring function in a VLAN. Use the no form of this
command to disable this function.
remote-span
no remote-span
Parameter
Description
Parameter
Description
N/A.
N/A.
Defaults
Disabled.
Command
Mode
VLAN configuration mode.
Usage Guide
Enter the end command or press Ctrl+C to return to privileged EXEC mode.
Enter the exit command to return to global configuration mode.
Configuration
Examples
Ruijie(config)# vlan 5
Ruijie(config-vlan)# remote-span
Related
Commands
Command
Description
show vlan
Show VLAN information.