Ruijie RG-S2600G-I Series - Page 136

CLI Reference Guide Redundancy Configuration Commands
Usage
guidelines
N/A.
Examples
Ruijie> enable
Ruijie# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Ruijie# show redundancy states
Redundancy states:
My state = 19 -ACTIVE
peer state = 37 -STANDBY HOT
...
show redundancy switchtimeout
Use show redundancy switchtimeout command to show current redundanct switchover timeout
time in user EXEC or privileged EXEC mode.
show redundancy switchtimeout
Default
N/A
Command
mode
User mode or Privileged EXEC mode.
Examples
Ruijie> enable
Ruijie# show redundancy switchtimeout
redundancy switch timeout is : 4000 ms.
...