CLI Reference Guide Hardware Entry Capacity Commands
Hardware Entry Capacity Commands
initialization route pbr
Use this command to specify the maximum number of policy-based routes.
initialization route pbr max_num
no initialization route pbr
The maximum number of policy-based routes.
The following example configures the maximum number of policy-based routes to 100:
Ruijie(config)# initialization route pbr ?
<1-256> Max number of policy-based route entry
Ruijie(config)# initialization route pbr 100
initialization route tunnel-termination
Use this command to specify the maximum number of IPv6 tunnel interfaces.
initialization route tunnel-termination max_num
no initialization route tunnel-termination
The maximum number of IPv6 tunnel interfaces.
32 IPv6 tunnel interfaces.
To Next Page
Loading...
