Ruijie RG-S2600G-I Series - Page 160

CLI Reference Guide Hardware Entry Capacity Commands
Command
Mode
Privileged EXEC mode
Usage Guide
N/A
Configuration
Examples
The following example configures the maximum number of IPv6 tunnel interface to 100:
Ruijie(config)# initialization route tunnel-termination ?
<1-128> Max number of tunnel termination entry
Ruijie(config)# initialization route tunnel-termination 100
Related
Commands
Command
Description
N/A
N/A
Platform
Description
N/A
initialization route shared-pool
Use this command to configure the maximum number of the shared pools.
initialization route shared-pool max_num
no initialization route shared-pool
Parameter
Description
Parameter
Description
max_num
The maximum number of the shared pools, which are shared by
MPLS,vlan-mapping, mac-vlan, subnet-vlan and qinq-adv functions.
Defaults
200 shared pool entries.
Command
Mode
Privileged EXEC mode
Usage Guide
N/A
Configuration
Examples
The following example configures the maximum number of the shared pools to 1000:
Ruijie(config)# initialization route tunnel-termination ?
<0-1024> max capacity of mpls/vlan-mapping/mac-vlan/subnet-vlan/qinq-adv
entry
Ruijie(config)# initialization route tunnel-termination 1000
Related
Commands
Command
Description