CLI Reference Guide Hardware Entry Capacity Commands
show initialization route
Use this command to show the hardware entry capacity.
show initialization route
Use this command to show the configuration value, the current running value and the default value of
all types of hardware entry capacities.
The following example displays the hardware entry capacity:
Ruijie #show initialization route
config running default
policy-based route entry: 64 64 64
tunnel termination entry: 32 32 32
shared-pool entry: 200 200 200
Indicates the current configuration which is
invalid.
Indicates the current running status which has
taken effect.
Indicates the system default value.
To Next Page
Loading...
