CLI ReferenceInterface Configuration Commands Interface Configuration Commands
port, routing port, and member port of the L3 aggregate port. This command is
equivalent to the shutdown and no shutdown commands.
Ruijie# clear interface gigabitethernet 1/1
Use this command to set an interface alias. Add no in the command to restore the
default.
By default, there is no alias.
Interface configuration mode.
Use show interfaces to display the interface information, including the alias.
Ruijie(config)# interface gigabitethernet 1/1
Ruijie(config-if)# description GBIC-1
Show the interface information.
To Next Page
Loading...
Need help?
General