Ruijie RG-S2600G-I Series - Page 166

CLI ReferenceInterface Configuration Commands Interface Configuration Commands
duplex
Use the duplex command in the interface configuration mode to specify the duplex
mode for the interface. Add no in the command to restore it to the default.
duplex {auto | full | half}
no duplex
Parameter
Description
Parameter
Description
auto
Self-adaptive full duplex and half duplex
full
Full duplex
half
Half duplex
Defaults
Auto.
Command Mode
Interface configuration mode.
Usage Guide
The duplex mode is associated with the interface type. Use show interfaces to
display the interface duplex mode.
Configuration
Examples
Ruijie(config-if)# duplex full
Related
Commands
Command
Description
show interfaces
Show the interface information.
Platform
Description