Ruijie RG-S2600G-I Series - Page 195

CLI ReferenceInterface Configuration Commands MAC Address Configuration Commands
commands
show address-bind
Show the IP address-MAC address
binding table.
Platform
description
address-bind ipv6-mode
Use this command to set the IP mode of IP address binding.
Set the compatible mode:
address-bind ipv6-mode compatible
Set the loose mode:
address-bind ipv6-mode loose
Set the compatible mode:
address-bind ipv6-mode strict
Parameter
description
N/A.
Command
mode
Global configuration mode.
Default value
Strict mode
Usage
guidelines
There are three IP address binding modes: compatible, loose and
strict. The following table shows the forwarding rules corresponding
to binding modes.
Mode
IPv4 forwarding rule
IPv6 forwarding rule
Strict
Only the packets
matching IPv4 and
MAC are forwarded.
No IPv6 packets are
forwarded (default).
Loose
Only the packets
matching IPv4 and
MAC are forwarded.
All IPv6 packets are
forwarded.
compatible
Only the packets
matching IPv4 and
MAC are forwarded.
Only the IPv6 packets
whose source MAC
address is the bound
MAC address are
forwarded.
Examples
Bind the IP address 192.168.5.2 and the MAC address