Ruijie RG-S2600G-I Series - Page 198

CLI ReferenceInterface Configuration Commands MAC Address Configuration Commands
Usage
guidelines
The MAC address learning could not be disabled on the interface with
the security function enabled. The interface with the MAC address
learning function disabled could not be configured the security
function.
Examples
The following example disables the MAC address learning.
Ruijie(config-if)# no mac-address-learning
mac-address-table aging-time
Use this command to specify the aging time of the dynamic MAC address. Use the no form of the
command to restore it to the default setting.
mac-address-table aging-time seconds
no mac-address-table aging-time
Parameter
description
Parameter
Description
seconds
Aging time of the dynamic MAC address (in
seconds). The time range depends on the
switch.
Default
configuration
300 seconds.
Command
mode
Global configuration mode.
Usage
guidelines
Use show mac-address-table aging-time to display
configuration.
Use show mac-address-table dynamic to display the dynamic MAC
address table.
Examples
Ruijie(config)# mac-address-table aging-time 150
Related
commands
Command
Description
show
mac-address-table
aging-time
Use this command to display the aging time
of the dynamic MAC address.
show
mac-address-table
dynamic
Use this command to display dynamic MAC
address.