Ruijie RG-S2600G-I Series - Page 212

CLI ReferenceInterface Configuration Commands MAC Address Configuration Commands
show mac-address-table vlan
Use this command to show all types of MAC addresses of the specified VLAN
show mac-address-table vlan [vlan-id]
Parameter
description
Parameter
Description
vlan-id
VLAN ID of the entry
Command
mode
Privileged EXEC mode.
Examples
Ruijie# show mac-address-table vlan 1
Vlan MAC Address Type Interface
---------- -------------------- -------- ---------
1 00d0.f800.1001 STATIC gigabitethernet 1/1
1 00d0.f800.1002 STATIC gigabitethernet 1/1
1 00d0.f800.1003 STATIC gigabitethernet 1/1
Related
commands
Command
Description
show
mac-address-table
static
Show the static MAC address.
show
mac-address-table
filtering
Show the filtering MAC
address.
show
mac-address-table
dynamic
Show the dynamic MAC
address.
show
mac-address-table
address
Show all types of MAC
addresses.
show
mac-address-table
interface
Show all types of MAC
addresses of the specified
interface.
show
mac-address-table
count
Show the address counts in
the MAC address table.
snmp trap mac-notification
Use this command to enable the MAC address trap notification on the specified interface. You can use
The no form of the command to disable this function.
snmp trap mac-notification {added | removed}