Ruijie RG-S2600G-I Series - Page 246

CLI ReferenceInterface Configuration Commands Voice VLAN Configuration Commands
Ruijie(config-if)# voice vlan enable
Related
commands
Command
Description
show voice vlan
Show Voice VLAN configurations
and the current state.
voice vlan mac-address
Use this command to set the recognizable Voice VLAN OUI address. Use the no form of this command
to remove the OUI address.
voice vlan mac-address mac-addr mask oui-mask [description text]
no voice vlan mac-address mac-addr
Parameter
description
Parameter
Description
mac-addr
In the format of H.H.H. The
source MAC address for the
voice packets.
oui-mask
In the format of H.H.H. The valid
length for the OUI address.
text
The description for the OUI
address.
Default
Settings
By default, no OUI has been configured.
Command
mode
Global configuration mode.
Usage
guidelines
Use this command to identify the voice packets from
different manufacturers. The first three bytes of the MAC
address for the voice device are used to identify the
manufacture. Voice VLAN determines whether the
packets are voice packets or not through the OUI address
obtained from the source MAC address and the OUI mask
for the received packets.
 Note
The Voice VLAN OUI address cannot be the multicast
address and the configured mask shall be continuous.
Examples
The following example shows how to set the OUI address
0012.3400.0000 as the valid address for the Voice VLAN:
Ruijie(config)# voice vlan mac-address 0012.3400.0000 mask
ffff.ff00.0000 description Company A