CLI ReferenceInterface Configuration Commands  MAC VLAN Configuration Commands 
 
Show the MAC-VLAN entries configured 
dynamically.
 
Show the MAC-VLAN entries configured 
statically.
 
Show the MAC-VLAN entries in MAC. 
Show  the  MAC-VLAN  entries  in  the 
specified MAC address range. 
Show  the  MAC-VLAN  entries  of  the 
specified VLAN. 
If the parameter mac-address is specified without the parameter mask, 
the MAC-VLAN entry of the single MAC address is shown. 
If  the  parameters  mac-address  and  mask  are  both  specified,  the 
MAC-VLAN entries in the specified MAC address range are shown. 
Ruijie# show mac-vlan all 
The following MAC VLAN addresses exist: 
S: Static   D: Dynamic   
MAC ADDR          MASK             VLAN ID   PRIO   STATE 
------------------------------------------------------- 
0011.1100.0000 ffff.ff00.0000 100       1      S 
0022.2222.0000 ffff.ffff.0000 200       2      S 
0000.0000.0003   ffff.ffff.ffff   300       3      D 
0000.0000.0004   ffff.ffff.ffff   400       4      D 
0000.0000.0005 ffff.ffff.ffff   500       5      S&D 
0000.0000.0006   ffff.ffff.ffff   600       6      S 
0000.0000.0007   ffff.ffff.ffff   700       7      S&D 
Total MAC VLAN address count: 7