Ruijie RG-S2600G-I Series - Page 260

CLI ReferenceInterface Configuration Commands MSTP Configuration Commands
show spanning-tree [ summary | forward-time | hello-time | max-age | inconsistentports |
tx-hold-count | pathcost method | max_hops | counters ]
Parameter
Description
Parameter
Description
summary
Show the information of MSTP instances and forwarding
status of their interfaces.
inconsistentports
Show the blocked port due to root guard or loop guard.
forward-time
Show BridgeForwardDelay.
hello-time
Show BridgeHelloTime.
max-age
Show BridgeMaxAge.
max-hops
Show the maximum hops of an instance.
tx-hold-count
Show TxHoldCount.
pathcost method
Show the method used for calculating path cost.
counters
Show statistics of STP receiving/transmitting packets.
Defaults
N/A
Command Mode
Privileged EXEC mode
Usage Guide
-
Configuration
Examples
Ruijie# show spanning-tree hello-time
Related Commands
Command
Description
spanning-tree pathcost
method
Set the pathcost calculation method.
spanning-tree forward-time
Set BridgeForwardDelay.
spanning-tree hello-time
Set BridgeHelloTime.
spanning-tree max-age
Set BridgeMaxAge.
spanning-tree max-hops
Set the maximum hops of an instance.
spanning-tree
tx-hold-count
Show TxHoldCount.
Platform Description
-
show spanning-tree interface
This command is used to show the STP configuration of the interface, including the optional
spanning tree configuration.
show spanning-tree interface interface-id [ { bpdufilter | portfast | bpduguard | link-type } ]
Parameter
Description
Parameter
Description
interface-id
Interface ID