Ruijie RG-S2600G-I Series User Manual

CLI ReferenceInterface Configuration Commands MSTP Configuration Commands
spanning-tree mode
This command is used to set the STP version in the global configuration mode. You can use
the no option of the command to restore the default version of the spanning-tree.
spanning-tree mode [ stp | rstp | mstp ]
no spanning-tree mode
Parameter
Description
Parameter
Description
stp
Spanning tree protocol (IEEE 802.1d)
rstp
Rapid spanning tree protocol (IEEE 802.1w)
mstp
Multiple spanning tree protocol (IEEE 802.1s)
Defaults
MSTP version
Command Mode
Global configuration mode
Usage Guide
-
Configuration
Examples
Ruijie(config)# spanning-tree mode stp
Related Commands
Command
Description
show spanning-tree
Show the spanning-tree configuration.
Platform Description
-
spanning-tree mst configure
This command is used to enter the MST configuration mode in the global configuration mode
and configure the MSTP region. You can use the no option of the command to restore all
parameters (name, revision, vlan map) to default.
spanning-tree mst configuration
no spanning-tree mst configuration
Parameter
Description
Parameter
Description
-
-
Defaults
By default, all VLANs are mapped to the instance 0, name is an empty string, and revision is 0.
Command Mode
Global configuration mode

Ruijie RG-S2600G-I Series Specifications

General

Brand	Ruijie
Model	RG-S2600G-I Series
Category	Switch
Language	English