Ruijie RG-S2600G-I Series - Page 282

CLI ReferenceInterface Configuration CommandsProtocol Frames Transparent Transmission Configuration Commands
Protocol Frames Transparent Transmission Configuration
Commands
bridge-frame forwarding protocol bpdu
Use the bridge-frame forwarding protocol bpdu command to enable transparent transmission of
BPDU frames. Use the no form of this command to disable transparent transmission of BPDU frames.
bridge-frame forwarding protocol bpdu
no bridge-frame forwarding protocol bpdu
Parameter
Description
Parameter
Description
-
-
Defaults
Transparent transmission of BPDU frames is disabled on a device by default.
Command
Modes
Global configuration mode
Usage
Guidelines
-
Examples
Example 1: Enable transparent transmission of BPDU frames on a device.
Ruijie(config)# bridge-frame forwarding protocol bpdu
Example 2: Disable transparent transmission of BPDU frames on the device.
Ruijie(config)# no bridge-frame forwarding protocol bpdu
Related
Commands
Command
Description
-
-
Platform
Description
-
bridge-frame forwarding protocol gvrp
Use the bridge-frame forwarding protocol gvrp command to enable transparent transmission of
GVRP frames. Use the no form of this command to disable transparent transmission of GVRP frames.
bridge-frame forwarding protocol gvrp
no bridge-frame forwarding protocol gvrp