Ruijie RG-S2600G-I Series - Page 283

CLI ReferenceInterface Configuration CommandsProtocol Frames Transparent Transmission Configuration Commands
Parameter
Description
Parameter
Description
-
-
Defaults
Transparent transmission of GVRP frames is disabled on a device by default.
Command
modes
Global configuration mode
Usage
Guidelines
-
Examples
Example 1: Enable transparent transmission of GVRP frames on a device.
Ruijie(config)# bridge-frame forwarding protocol gvrp
Example 2: Disable transparent transmission of GVRP frames on a device.
Ruijie(config)# no bridge-frame forwarding protocol gvrp
Related
Commands
Command
Description
-
-
Platform
Description
-
bridge-frame forwarding protocol 802.1x
Use the bridge-frame forwarding protocol 802.1x command to enable transparent transmission of
802.1X frames. Use the no form of this command to disable transparent transmission of 802.1X
frames.
bridge-frame forwarding protocol 802.1x
no bridge-frame forwarding protocol 802.1x
Parameter
Description
Parameter
Description
-
-
Defaults
Transparent transmission of 802.1X frames is enabled on a device by default.
Command
Modes
Global configuration mode
Usage
Guidelines
-
Examples
Example 1: Enable transparent transmission of 802.1X frames on a device.