Ruijie RG-S2600G-I Series - Page 32

CLI Reference Guide Basic Configuration Management
Command Mode
Global configuration mode.
Usage Guide
If you have not set the prompt string, the prompt string is the system name, which varies with the
system name. The prompt command is valid only in the EXEC mode.
Configuration
Examples
Set the prompt string to rgnos:
Ruijie(config)# prompt rgnos
Ruijie(config)# end
rgnos
Related
Commands
Command
Description
-
-
Platform
Description
-
reload
To restart the device system, execute the privileged user command reload.
reload [ text | in [ hh: ] mm [ text ] | at hh:mm [month day year ] [ text ] | cancel ]
Parameter
Description
Parameter
Description
text
Cause to restart, 1-255 bytes
in mmm hh:mm
The system is restarted after specified time interval.
at hh:mm
The system is restarted at the specified time. Up to 200
days is supported
month
Month in the range January to December
day
Date in the range 1 to 31
year
Year in the range 1993 to 2035. The abbreviation is not
allowed.
cancel
Cancel scheduled restart.
Defaults
-
Command Mode
Privileged EXEC mode.
Usage Guide
This command is used to restart the device at specified time, which may facilitate the
management.
Configuration
Examples
Example 1 configures to restart the system in 10 minutes.
Ruijie# reload in 10
Router will reload in 600 seconds
Related
Command
Description