CLI Reference Guide Basic Configuration Management
service password-encryption
To encrypt the password, execute this command. The no form of this command restores to the
default value, but the password in cipher text cannot be restored to plain text.
service password-encryption
Global configuration mode.
Use the service password-encryption command to control. This command is disabled by default.
Various passwords are displayed in form of plain text, unless it is directly configured in cipher text
form. After you execute the service password-encryption and show running or write command to
save the configuration, the password transforms into cipher text. If you disable the command, the
password in cipher text cannot be restored to plain text.
The example below encrypts the password:
Ruijie(config)# service password-encryption
Set passwords of different privileges.
session-timeout
To configure the session timeout for the remote terminal established in current LINE, use the
session-timeout command. When the session timeout for the remote terminal in the LINE is
cancelled, the session will never be timeout.
session-timeout minutes [ output ]
no session-timeout
The minutes of specified timeout.
To Next Page
Loading...
Need help?
General