Ruijie RG-S2600G-I Series - Page 323

CLI ReferenceInterface Configuration Commands LLDP Configuration Commands
Hold multiplier
TTL multiplier
Reinit delay
Port re-initialization delay
Transmit delay
LLDPDU transmit delay
Notification interval
Interval for sending LLDP Traps
Fast start counts
The number of fast sent LLDPDUs
Port status of LLDP
Whether LLDP is enabled on the port
Port state
Link status of port: UP or DOWN
Port encapsulation
LLDPDU encapsulation format
Operational mode
Operating mode of LLDP
Notification enable
Whether LLDP Trap is enabled on the port
Error detect enable
Whether error detection is enabled on the port
Number of neighbors
Number of neighbors
Number of MED neighbors
Number of MED neighbors
Related
commands
Command
Description
-
-
Platform
description
Only supported by switch products.
show lldp tlv-config
Display the advertisable TLV configuration of a port.
show lldp tlv-config [interface interface-name ]
Parameter
description
Parameter
Description
interface-name
Interface name
Default
-
Command
mode
Privileged EXEC mode
Usage
guidelines
Interface parameter: display the LLDP TLV configuration of the specified interface.
Examples
Display TLV information of port 1:
Ruijie# show lldp tlv-config interface GigabitEthernet 0/1
LLDP tlv-config of port [GigabitEthernet 0/1]