Ruijie RG-S2600G-I Series - Page 330

CLI ReferenceInterface Configuration Commands QinQ Configuration Commands
Command
mode
Interface configuration mode.
Examples
Ruijie(config)# interface gigabitEthernet 0/2
Ruijie(config-if)# inner-priority-trust enable
Related
commands
Command
Description
show
inner-priority-trust
Platform
description
The software version is RGOS10.1 and later.
mac-address-mapping index-id source-vlan src-vlan-list destination-vlan dst-vlan-id
Use this command to copy the MAC address dynamically-learned from the source VLAN to the
destination VLAN.
mac-address-mapping index-id source-vlan src-vlan-id destination-vlan dst-vlan-list
no mac-address-mapping index-id source-vlan src-vlan-id destination-vlan
dst-vlan-list
Parameter
description
Parameter
Description
no
Cancel to copy the MAC address
dynamically-learned from the source
VLAN to the destination VLAN.
index-id
MAC address copy policy ID.
src-vlan-list
The source VLAN list of the MAC address
copy policy.
dst-vlan-list
The destination VLAN list of the MAC
address copy policy.
Command
mode
Interface configuration mode.
Examples
ruijie#configure
ruijie(config)# interface gigabitEthernet 0/2
ruijie(config-if)# mac-address-mapping 1 source-vlan 1-3
destination-vlan 5
ruijie(config-if)#end