CLI ReferenceInterface Configuration Commands QinQ Configuration Commands
The software version must be RGOS10.1 and later.
show interface dot1q-tunnel
Use this command to show dot1q-tunnel configuration.
show interface [intf-id] dot1q-tunnel
Ruijie# show interface dot1q-tunnel
Interface: Gi0/3
Native vlan: 10
Allowed vlan list: 4-6,10,30-60
Tagged vlan list: 4,6,30-60
The software version must be RGOS10.3 and later.
show interface intf-name remark
Use this command to show the priority mapping configurations.
show interface intf-name remark
Ruijie# show interface intf-name remark
Ports Type From value To value
To Next Page
Loading...
Need help?
General