CLI ReferenceInterface Configuration Commands QinQ Configuration Commands
The software version must be RGOS10.3 and later.
show frame-tag tpid
Use this command to show the configuration of interface tpid.
show frame-tag tpid [interface <intf-id>]
The tpid is not modified.
Ruijie# show frame-tag tpid
Ports tpid
----- ---------
Gi0/1 0x9100
The software version must be RGOS10.1 and later.
show inner-priority-trust
Use this command to show the priority copy configuration.
show inner-priority-trust
Priority copy is disabled by default.
Ruijie# show inner-priority-trust
Port inner-priority-trust
---- ----------
Gi0/1 enable
To Next Page
Loading...
Need help?
General