Ruijie RG-S2600G-I Series User Manual

CLI ReferenceInterface Configuration Commands QinQ Configuration Commands
no
Restore the transparent transmission
address to the default value.
By default, the first three bytes of the
transparent transmission address are
01d0f8, and the latest three bytes are
(stp: 000005; grip: 000006 )
Command
mode
Global configuration mode.
Examples
Here is an example of setting the MAC address for the L2-protocol
transparent transmission function:
Ruijie(config-if)# l2protocol-tunnel gvrp tunnel-dmac 011AA9
000005
Ruijie(config-if)#end
Related
commands
Command
Description
show l2protocol-tunnel
{gvrp|stp}
Platform
description
The software version must be RGOS10.4 and later.
show dot1q-tunnel
Use this command to show whether dot1q-tunnel of interface is enabled or not.
show dot1q-tunnel [interface intf-id]
Parameter
description
Parameter
Description
intf-id
The specified interface.
Default
configuration
N/A.
Command
mode
Privileged EXEC mode.
Examples
Ruijie# show dot1q-tunnel
Ports Dot1q-tunnel
----- ---------
Gi0/1 Enable

Ruijie RG-S2600G-I Series Specifications

General

Brand	Ruijie
Model	RG-S2600G-I Series
Category	Switch
Language	English