CLI Reference IP Address Configuration Commands
The maximum number of the unresolved ARP entries in the
range of 1 to 8192. The default value is 8192.
The ARP cache table can contain up to 8192 unresolved entries.
Global configuration mode.
If there are a large number of unresolved entries in the ARP cache table and they do not
disappear after a period of time, this command can be used to limit the quantity of the
unresolved entries.
The following configuration sets the maximum number of the unresolved items as 500.
arp unresolve 500Ruijie(config-interface-vfc)#bind mac-address
001d.0928.b62f
Use this command to remove a dynamic ARP mapping record from the ARP cache table
and clear an IP route cache table in privileged EXEC mode
clear arp-cache [ vrf vrf_name | trusted ] [ ip [mask ] ] | interface interface-name ]
This command can be used to refresh an ARP cache table.
To Next Page
Loading...
Need help?
General