Ruijie RG-S2600G-I Series User Manual

CLI Reference DHCP Configuration Commands
Parameter
description
Parameter
Description
hardware-address
Define the MAC address of the DHCP
client.
type
To indicate the hardware platform protocol
of the DHCP client, use the character string
or numeric to define.
Character string:
 Ethernet
 ieee802
Numeric:
 1 (10M Ethernet)
 6 (IEEE 802)
Default
No hardware address is defined by default.
If the type is not specified when the hardware address is defined, it is
the Ethernet by default.
Command
mode
DHCP address pool configuration mode.
Usage
guidelines
This command can be used only when the DHCP is defined by
manual binding.
Examples
The example below defines the MAC address 00d0.f838.bf3d with the
type ethernet.
hardware-address 00d0.f838.bf3d
Related
commands
Command
Description
client-identifier
Define the unique ID of the DHCP client
(indicated in hex separated by dot).
host
Define the IP address and network mask,
which is used to configure the DHCP
manual binding.
ip dhcp pool
Define the name of the DHCP address pool
and enter the DHCP address pool
configuration mode.
default-router
Define the default router of the DHCP client.
host
Use this command to define the IP address and network mask of the DHCP client host in the DHCP address pool
configuration mode. The no form of this command can be used to delete the definition of the IP address and

Ruijie RG-S2600G-I Series Specifications

General

Brand	Ruijie
Model	RG-S2600G-I Series
Category	Switch
Language	English