Ruijie RG-S2600G-I Series User Manual

CLI Reference DHCP Configuration Commands
ip dhcp pool
Define the name of the DHCP address
pool and enter the DHCP address
pool configuration mode.
next-server
Use this command to define the startup sever list that the DHCP client accesses during startup in the DHCP
address configuration mode. The no form of this command can be used to delete the definition of the startup
server list.
next-server ip-address [ ip-address2…ip-address8 ]
no next-server
Parameter
description
Parameter
Description
ip-address
Define the IP address of the startup server,
which is usually the TFTP server. It is
required to configure one IP address at
least.
ip-address2…ip-address8
(Optional) Up to 8 startup servers can be
configured.
Default
N/A.
Command
mode
DHCP address pool configuration mode.
Usage
guidelines
When more than one startup server is defined, the former will
possess higher priory. The DHCP client will select the next startup
server only when its communication with the former startup server
fails.
Examples
The configuration example below specifies the startup server
192.168.12.4 for the DHCP client.
next-server 192.168.12.4
Related
commands
Command
Description
bootfile
Define the default startup mapping file name of
the DHCP client.
ip dhcp pool
Define the name of the DHCP address pool and
enter the DHCP address pool configuration mode.
ip help-address
Define the Helper address on the interface.
option
Configure the option of the RGOS software
DHCP server.
option
Use this command to configure the option of the DHCP server in the DHCP address pool configuration mode. The

Ruijie RG-S2600G-I Series Specifications

General

Brand	Ruijie
Model	RG-S2600G-I Series
Category	Switch
Language	English