Ruijie RG-S2600G-I Series - Page 454

CLI Reference DHCPv6 Configuration Commands
ipv6-address
Specified IPv6 address or prefix.
*
All IPv6 addresses or prefixes.
Defaults
N/A
Command
Mode
Privileged EXEC mode.
Usage Guide
If the * parameter is not specified, all conflicts of IPv6 addresses or prefixes will be deleted.
If the ipv6-address parameter is specified, only the specified address conflict will be deleted.
Configuration
Examples
The following example shows how to clear a DHCPv6 address conflict:
Ruijie# clear ipv6 dhcp conflict 2008:50::2
Related
Commands
Command
Description
show ipv6 dhcp conflict
Show address conflict information.
Platform
Description
N/A
clear ipv6 dhcp relay statistics
Use this command to clear the packet sending and receiving condition with the DHCPv6 Relay
function enabled.
clear ipv6 dhcp relay statistics
Parameter
Description
Parameter
Description
N/A.
N/A.
Defaults
N/A.
Command
Mode
Privileged EXEC mode.
Usage Guide
N/A.
Configuration
Examples
Ruijie# clear ipv6 dhcp relay statisticsRuijie(config-interface-vfc)#bind
mac-address 001d.0928.b62f
Related
Commands
Command
Description
show ipv6 dhcp relay statistics
Show the statistical information.