CLI Reference DHCPv6 Configuration Commands
clear ipv6 dhcp server statistics
Use this command to clear the DHCPv6 server statistics.
clear ipv6 dhcp server statistics
This command is used to clear the DHCPv6 server statistics.
The following example shows how to clear the DHCPv6 server statistics:
Ruijie(config)# clear ipv6 dhcp server statistics
Use this command to set the DNS Server list information for the DHCPv6 Server. Use the no form of
this command to remove the configuration.
no dns-server ipv6-address
Set the IPv6 address or the DNS server.
By default, no DNS server list is configured.
To Next Page
Loading...
Need help?
General