Ruijie RG-S2600G-I Series - Page 509

CLI Reference IPv4 REF Configuration Commands
commands
-
-
Platform
description
N/A
Command
history
Version
Description
-
-
show ip ref adjacency
This command can be used to display a special adjacent node or all the current adjacent
nodes. This command is as follows:
show ip ref adjacency [glean | local | ip | interface interface_type interface_number]
Parameter
Description
Parameter
Description
glean
Gleans the adjacent nodes.
local
Local adjacent nodes
ip
IP of the next hop
interface_type
Specifies the type of interface
interface_number
Specifies the number of interface
Default
configuratio
n
None
Command
mode
Privileged EXEC mode
Usage guide
This command can be used to display the adjacent table in the current REF module.
The table displays the gleaned adjacency, local adjacency, IP adjacency,
interface-related adjacency and all the adjacent node information.