Ruijie RG-S2600G-I Series - Page 524

CLI Reference IP Routing Configuration Commands
Routing entry for 30.0.0.0/8
Distance 110, metric 20
Routing Descriptor Blocks:
*192.1.1.1, 00:01:11 ago, via VLAN 1, generated by OSPF,
extern 2
Field
Description
Routing
Descriptor
Blocks
Next hop IP address, source,
update time, forwarding
interface, source routing protocol
and type of route information
Ruijie# show ip route count
--------- route info ----------
the num of active route: 5
Ruijie# show ip route weight
------------[distance/metric/weight]-----------
S 23.0.0.0/8 [1/0/2] via 192.1.1.20
S 172.0.0.0/16 [1/0/4] via 192.0.0.1
show ipv6 route
Use the command to display the configuration of the IPv6 routing table.
show ipv6 route [[network/prefix-length] | summary]
Parameter
description
Parameter
Description
network
(Optional) Show the route information to
the network.
summary
(Optional)Show the classified statistics
of the number of ipv6 routes.
Default
configuration
All routes are displayed by default.
Command
mode
Privileged EXEC mode, global configuration mode, interface
configuration mode, routing protocol configuration mode, route map
configuration mode.