Ruijie RG-S2600G-I Series - Page 547

CLI Reference IGMP Snooping Configuration Commands
Command
mode
Global configuration mode.
Usage
guidelines
When the IGMP Snooping works in the SVGL or IVGL-SVGL
mode, a profile shall be associated to specify the multicast group
address range applied in the SVGL or IVGL-SVGL mode. That is
to say, the member ports of the multicast forwarding entry can be
forwarded across the VLANs while the member ports of the
multicast forwarding entry in the other multicast address range
must belong to the same VLAN. By default, no profile is
associated.
Examples
Ruijie(config)# ip igmp snooping svgl profile 1
Related
commands
Command
Description
ip igmp snooping
svgl
Enable igmp snooping
and enter the SVGL mode.
ip igmp snooping
ivgl-svgl
Enable igmp snooping
and enter the hybrid mode
ip igmp snooping svgl subvlan
To specify the subvlan of multicast VLAN, execute the global configuration command of
"ip igmp snooping svgl subvlan". Use no form of this command to remove this configuration.
ip igmp snooping svgl subvlan [vid-range]
no ip igmp snooping svgl subvlan [vid-range]
Parameter
description
Parameter
Description
vid-range
VLAN ID or range of
VLAN ID
Default
By default, no subvlan is specified for svgl, and all
VLANs serve as its subvlans.
Command
mode
Global configuration mode.
Usage
guidelines
This command only takes effect in SVGL or
IVGL-SVGL mode.
Examples
The following example configures the device
operating in igmp snooping svgl mode to associate
VLAN 2, 5, 6 and 7: