Ruijie RG-S2600G-I Series - Page 546

CLI Reference IGMP Snooping Configuration Commands
ip igmp snooping svgl
To enable IGMP snooping and enter the SVGL mode, execute the ip igmp snooping svgl command in
the global configuration mode. The no form of this command is used to disable IGMP snooping.
ip igmp snooping svgl
no ip igmp snooping
Parameter
description
N/A.
Default
Disabled.
Command
mode
Global configuration mode.
Usage
guidelines
The SVGL works only when the multicast IP address range is
configured.
Examples
The following example demonstrates how to enable IGMP snooping
and enter the SVGL mode:
Ruijie(config)# ip igmp snooping svgl
Related
commands
Command
Description
ip igmp snooping
ivgl
Enable igmp
snooping and enter the
IVGL mode.
ip igmp snooping
ivgl-svgl
Enable igmp
snooping and enter the
hybrid mode
ip igmp snooping svgl profile
To specify the multicast group address range applied in the SVGL/IVGL-SVGL mode, execute the ip
igmp snooping profile profile-number command in the global configuration mode. Use the no ip igmp
snooping profile command to cancel the association.
ip igmp snooping svgl profile profile-number
no ip igmp snooping svgl profile
Parameter
description
Parameter
Description
profile-number
Profile number, in the range of 1-65536.
Default
No profile is associated.