Ruijie RG-S2600G-I Series - Page 552

CLI Reference IGMP Snooping Configuration Commands
Parameter
description
Parameter
Description
vid
VLAN ID of a routing interface
Default
Disabled.
Command
mode
Global configuration mode.
Usage
guidelines
With the source port check function enabled, the dynamic routing
interface learning function will improve the application flexibility of
IGMP snooping.
Examples
The following example demonstrates how to enable the dynamic
routing interface learning function on the equipment:
Ruijie(config)# ip igmp snooping vlan 1 mrouter learn pim-dvmrp
Related
commands
Command
Description
ip igmp snooping
mrouter learn
pim-dvmrp
Enable the dynamic
routing interface learning
function on the multicast
routing port globally
ip igmp snooping vlan querier
To enable the IGMP querier function in VLAN, execute "ip igmp snooping vlan querier"
global configuration command. Use no form of this command to disable the IGMP querier
function in the corresponding VLAN.
ip igmp snooping vlan vid querier
no ip igmp snooping vlan vid querier
Parameter
description
Parameter
Description
vid
VLAN ID
Default
Querier function is disabled.
Command
mode
Global configuration mode.
Usage
guidelines
After globally enabling the IGMP querier, you must
enable IGMP querier function in VLAN to effect this
command.