Ruijie RG-S2600G-I Series - Page 566

CLI Reference MLD Snooping Configuration Commands
Ruijie(config-profile)# range FF77::1
Ruijie(config-profile)# permit
Related
commands
Command
Description
ipv6 mld profile
Create one profile.
range
Set the multicast address range.
deny
Set the profile action deny.
ipv6 mld snooping ivgl
Use this command to enable the mld snooping and specify the ivgl mode in the global configuration
mode. Use the no form of this command to disable this function.
ipv6 mld snooping ivgl
no ipv6 mld snooping
Parameter
description
Parameter
Description
-
-
Default
Settings
Disabled.
Command
mode
Global configuration mode.
Usage
guidelines
In this mode, the multicast flow between the VLANs are
independent. The host can only request for receiving the
multicast flow from the route port in the same VLAN.
When receiving the multicast flow from any VLAN, the
switch forwards them to the member port in the same
VLAN.
Examples
The following example shows how to enable the mld snooping and
set the ivgl mode:
Ruijie(config)# ipv6 mld snooping ivgl
Related
commands
Command
Description
ipv6 mld
snooping svgl
Enable the mld snooping and set
the svgl mode.
ipv6 mld
snooping
ivgl-svgl
Enable the mld snooping and set
the ivgl-svgl mode.