CLI Reference Guide UPGRADE Configuration Commands
(Slot 1): MAIN installed.
(Slot 1): All images have been installed.
(Slot 6): Installing MAIN
(Slot 6): Download image!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!![OK - 8,003,872 bytes]
Waiting for image installed....Complete
(Slot 6): MAIN installed.
(Slot 6): All images have been installed.
To synchronize a certain file from the master device to each non-master device, run the synchronize
command in the privileged EXEC mode.
Name of the file to be synchronized. The file is located on the
master device and supports only a flash: prefix.
Run this command to synchronize a specified file from the master device to each non-master device.
The file synchronized to a non-master device is a file with the same name in the same
path as the specified file on the master device.
Example: Run the synchronize filename command to synchronize the rgos.bin file from the master
device to each non-master device.
Ruijie#synchronize flash:rgos.bin
Synchornize file /rgos.bin to slave:/
Device(6): download
To Next Page
Loading...
Need help?
General