Ruijie RG-S2600G-I Series - Page 608

CLI Reference AAA Configuration Commands
show aaa domain
Use this command to show all current domain information
show aaa domain [default | domain-name]
Parameter
description
Parameter
Description
default
Use this parameter to show the default
domain.
domain-name
Show the specified domain.
Default
N/A
Command
mode
Privileged EXEC mode.
Usage
guidelines
If no domain-name is specified, all domain information will be
displayed.
Examples
The following example shows the domain named domain.com
Ruijie(config)# show aaa domain domain.com
=============Domain domain.com=============
State: Active
Username format: Without-domain
Access limit: No limit
802.1X Access statistic: 0
Selected method list:
authentication dot1x default
Related
commands
Command
Description
aaa new-model
Enable the AAA security service.
aaa domain
enable
Enable the domain-name-based
AAA service.
state
Use this command to set whether the configured domain is valid. The no form of this command restore it
to the default setting.
state {block | active}
no state