CLI Reference AAA Configuration Commands
The configured domain is invalid.
The configured domain is valid.
Domain configuration mode.
Use this command to set whether the specified configured domain is
valid.
The following example set the configured domain to be invalid
Ruijie(config)# aaa domain ruijie.com
Ruijie(config-aaa-domain)# state block
Enable the AAA security service.
Enable the domain-name-based
AAA service.
Show the domain configuration .
username-format
Use this command to configure the user name whether to be with the domain information when the NAS
interacts with the servers. The no form of this command restores it to the default setting.
username-format {without-domain| with-domain}
no username-format
Set the user name without the domain
information.
Set the user name with the domain
information.
To Next Page
Loading...
Need help?
General