CLI Reference RADIUS Configuration Commands
Global configuration mode.
A shared password is the basis for communications between the
device and the RADIUS security server. In order to allow the device to
communicate with the RADIUS security server, you must define the
same shared password on the device and the RADIUS security
server.
The following example defines the shared password aaa for the
RADIUS security server:
Ruijie(config)# radius-server key aaa
Define the RADIUS security server.
Define the number of RADIUS packet
retransmissions.
Define the timeout for the RADIUS packet.
radius-server retransmit
Use this command to configure the number of packet retransmissions before the device considers that
the RADIUS security server does not respond. The no form of this command is used to restore it to the
default setting.
radius-server retransmit retries
no radius-server retransmit
Number of retransmissions
The default number of retransmissions is 3.
Global configuration mode.
AAA uses the next method to authenticate users only when the
current security server for authentication does not respond. When the
device retransmits the RADIUS packet for the specified times and the
interval between every two retries is timeout, the device considers
To Next Page
Loading...
Need help?
General