Example 2: Upload the file to the tftp server:
Ruijie# copy flash:/rgos.bin tftp://192.168.201.54/rgos.bin
Example 3: Use the xmodem protocol to download the file:
Ruijie# copy xmodem: flash:/config.text
Example 4: Copy the file to the U disk:
Ruijie#copy flash:/config.text usb0:/config.text
Example 5: Copy the file to the slave management board:
Ruijie#copy flash:/config.text slave:/config.text
Example 6: Copy the file from the flash to the SD card:
Ruijie#copy flash:/rgos.bin sd0:/rgos.bin
Example 7: Copy the file from the U disk to the SD card:
Ruijie#copy usb0:/config.text sd0:/config.text
Example 8: Copy the file from the SD card to the U disk:
Ruijie#copy sd0:/config.text usb0:/config.text
Example 9: Obtain the command line help to judge which file system prefix combinations are
supported by the current products and versions.
Ruijie#copy ?
WORD Copy from current file system
flash: Copy from flash file system
ftp: Copy from ftp: file system
help Help informatioin
running-config Copy from current system configuration
startup-config Copy from startup configuration
tftp: Copy from tftp: file system
usb0: Copy from usb0 file system
usb1: Copy from usb1 file system
xmodem: Copy from xmodem: file system
Ruijie#copy tftp://172.18.2.18/rgos.bin ?
WORD Copy to current file system
flash: Copy to flash: file system
running-config Update (merge with) current system configuration
startup-config Copy to startup configuration
usb0: Copy to usb0 file system
usb1: Copy to usb1 file system
To Next Page
Loading...
