Ruijie RG-S2600G-I Series User Manual

CLI Reference Web Authentication Configuration Commands
arp
If the ARP CHECK is enabled on the access device, the keyword arp
is needed for ARP binding of the network resources free of
authentication (optional). It is necessary for IPv4 network resources
only.
Defaults
No network resource without authentication is set.
Command
Mode
Global configuration mode
Usage Guide
When Web/802.1x authentication is enabled, all users must pass Web/client authentication to access
network resources. This command is used to make certain network resources available to
unauthenticated users. All users can access the Web sites free of authentication.
Up to 50 network resource ranges can be free of authentication.
Configuration
Examples
Example 1: Set the Web site with the IP address as 172.16.0.1 free of authentication.
Ruijie(config)# http redirect direct-site 172.16.0.1
Related
Commands
Command
Description
show http redirect
View the HTTP redirection configuration.
Platform
Description
N/A
http redirect homepage
This command is used to set the address of the redirection homepage. The no form of this command
is used to delete the address of redirection homepage.
http redirect homepage url-string
no http redirect homepage
Parameter
Description
Parameter
Description
url-string
The homepage address/client download service homepage address
must begin with http:// or https://. Otherwise, the configuration will fail.
A homepage address includes up to 255 characters.
Defaults
The address of the authentication homepage is not configured.
Command
Mode
Global configuration mode
Usage Guide
To apply the Web authentication/automatic client acquisition function successfully, the address of the
authentication homepage/ client download service homepage must be configured.

Ruijie RG-S2600G-I Series Specifications

General

Brand	Ruijie
Model	RG-S2600G-I Series
Category	Switch
Language	English