Ruijie RG-S2600G-I Series - Page 715

CLI Reference GSN Configuration Commands
GSN Configuration Commands
security address-bind enable
Use this command to enable the security address-bind policy in the interface configuration mode. Use
the no form of this command to disable this function.
security address-bind enable
no security address-bind enable
Default
N/A.
Command
mode
Interface configuration mode, support L2 switch port excluding AP
and AP member port.
Usage
guidelines
It is worth mentioning that this command takes effect only after the
GSN function is enabled.
Examples
Ruijie(config-if)# security address-bind enable
Related
commands
Command
Description
security gsn
enable
Enable the global GSN switch.
security community
Use this command to configure the security community for the communication with smp server.
security { [ v1 | v2 ] community community | v3 user username }
no security { [ v1 | v2 ] community community | v3 user username }
Parameter
description
Parameter
Description
community
The community character string
interacting with the server.
username
V3 security community username.
Default
The security community is not configured.
Command
mode
Global configuration mode.