Ruijie RG-S2600G-I Series - Page 814

CLI Reference NFPP Configuration Commands
commands
nfpp
dhcp-guar
d policy
Show the rate-limit threshold
and attack threshold.
show nfpp dhcp-guard
summary
Show the configurations.
show nfpp dhcp-guard
hosts
Show the monitored host
list.
clear nfpp dhcp-guard
hosts
Clear the monitored host.
dhcp-guard enable
Use this command to enable the DHCP anti-attack function.
dhcp-guard enable
Parameter
description
Parameter
Description
-
-
Default
Settings
Disabled
Command
mode
NFPP configuration mode.
Usage
guidelines
N/A
Examples
Ruijie(config)# nfpp
Ruijie(config-nfpp)# dhcp-guard enable
dhcp-guard isolate-period
Use this command to set the isolate time globally.
dhcp-guard isolate-period {seconds | permanent}
Parameter
description
Parameter
Description
seconds
Set the isolate time, in seconds. The
valid range is 0, or [30, 86400].
permanent
Permanent isolation.