Ruijie RG-S2600G-I Series - Page 832

CLI Reference NFPP Configuration Commands
Command
mode
NFPP configuration mode.
Usage
guidelines
N/A
Examples
Ruijie(config)# nfpp
Ruijie(config-nfpp)# icmp-guard enable
Related
commands
Command
Description

nffp icmp-guard enable
Enable the ICMP anti-attack
function on the interface.

show nfpp icmp-guard
summary
Show the configurations.
icmp-guard isolate-period
Use this command to set the isolate time globally.
icmp-guard isolate-period {seconds | permanent}
Parameter
description
Parameter
Description
seconds
Set the isolate time, in seconds. The
valid range is 0, or [30, 86400].
permanent
Permanent isolation.
Default
Settings
The default isolate time is 0, which means no isolation.
Command
mode
NFPP configuration mode.
Usage
guidelines
The isolate period can be configured globally or based on
the interface. For one interface, if the isolate period is not
set based on the interface, the global value shall be
adopted; or the interface-based isolate period shall be
adopted.
Examples
Ruijie(config)# nfpp