Ruijie RG-S2600G-I Series - Page 848

CLI Reference NFPP Configuration Commands
Related
commands
Command
Description
ip-guard
attack-threshold
Set the global attack threshold.
nfpp
ip-gu
ard
polic
y
Set the limit threshold and attack
threshold.
sho
w
nfpp
ip-gu
ard
host
s
Show the monitored host.
nfpp ip-guard enable
Use this command to enable the ICMP anti-attack function on the interface.
nfpp ip-guard enable
Parameter
description
Parameter
Description
-
-
Default
Settings
The IP anti-scan function is not enabled on the interface.
Command
mode
Interface configuration mode.
Usage
guidelines
The interface IP anti-scan configuration is prior to the
global configuration.
Examples
Ruijie(config)# interface G0/1
Ruijie(config-if)# nfpp ip-guard enable
Related
commands
Command
Description
ip-guard enable
Enable the anti-ARP attack
function.