Ruijie RG-S2600G-I Series - Page 851

CLI Reference NFPP Configuration Commands
show nfpp
ip-guard summary
Show the configurations.
show nfpp
ip-guard hosts
Show the monitored host.
clear nfpp
ip-guard hosts
Clear the isolated host.
nfpp ip-guard scan-threshold
Use this command to set the scan threshold.
nfpp ip-guard scan-threshold pkt-cnt
Parameter
description
Parameter
Description
pkt-cnt
Set the scan threshold with the valid
range of [1, 9999].
Default
Settings
By default, the sport-based scan threshold is not configured.
Command
mode
Interface configuration mode.
Usage
guidelines
N/A
Examples
Ruijie(config)# interface G 0/1
Ruijie(config-if)# nfpp ip-guard scan-threshold 20
Related
commands
Command
Description
ip-gu
ard
attac
k-thr
esho
ld
Set the global attack threshold.
show nfpp
ip-guard summary
Show the configurations.