Ruijie RG-S2600G-I Series - Page 853

CLI Reference NFPP Configuration Commands
show nfpp ip-guard
summary
Show the configurations.
nd-guard enable
Use this command to enable the ND anti-attack function.
nd-guard enable
Parameter
description
Parameter
Description
-
-
Default
Settings
Enabled
Command
mode
NFPP configuration mode.
Usage
guidelines
N/A
Examples
Ruijie(config)# nfpp
Ruijie(config-nfpp)# nd-guard enable
Related
commands
Command
Description

nffp nd-guard enable
Enable the ND anti-attack
function on the interface.

show nfpp nd-guard
summary
Show the configurations.
nd-guard rate-limit
Use this command to set the rate-limit threshold globally.
nd-guard rate-limit per-port {ns-na | rs | ra-redirect} pps
Parameter
description
Parameter
Description
ns-na
Set the neighbor request and
neighbor advertisement.
rs
Set the router request.
ra-redirect
Set the router advertisement and the