EasyManua.ls Logo

Ruijie RG-S2600G-I Series - Page 856

Ruijie RG-S2600G-I Series
1192 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CLI Reference NFPP Configuration Commands
guidelines
than the rate-limit threshold.
For ND snooping, the port is classified into untrusted port
and trusted port. The untrusted port connects to the host
and the trusted port connects to the gateway. The rate-limt
threshold for the trusted port shall higher than the one for
the untrusted port because the traffic of the trusted port
generally is higher than the traffic of the untrusted port.
For the trusted port with ND snooping enabled, ND
snooping advertises ND guard to set the rate-limit
threshold and attack threshold for the three categories of
packets as 800pps and 900pps respectively.
Examples
Ruijie(config)# interface G 0/1
Ruijie(config-if)# nfpp nd-guard policy per-port ns-na 50 100
Ruijie(config-if)# nfpp nd-guard policy per-port rs 10 20
Ruijie(config-if)# nfpp nd-guard policy per-port ra-redirect 10 20
Related
commands
Command
Description
nd-g
uard
attac
k-thr
esho
ld
Set the global attack threshold.
nd-g
uard
rate-l
imit
Set the global rate-limit threshold.
show nfpp
nd-guard
summary
Show the configurations.

Table of Contents

Related product manuals