Ruijie RG-S2600G-I Series - Page 855

CLI Reference NFPP Configuration Commands
guidelines
global configuration.
Examples
Ruijie(config)# interface G0/1
Ruijie(config-if)# nfpp nd-guard enable
Related
commands
Command
Description
nd-guard enable
Enable the ND anti- attack
function.
sho
w
nfpp
nd-g
uard
sum
mary
Show the configurations.
nfpp nd-guard policy
Use this command to set the rate-limit threshold and the attack threshold.
nfpp nd-guard policy per-port {ns-na | rs | ra-redirect} rate-limit-pps attack-threshold-
pps
Parameter
description
Parameter
Description
ns-na
Set the neighbor request and
neighbor advertisement.
rs
Set the router request.
ra-redirect
Set the router advertisement and
the redirect packets.
rate-limit-pps
Set the rate-limit threshold with the
valid range of [1, 9999].
attack-threshold-pps
Set the attack threshold with the
valid range of [1, 9999].
Default
Settings
By default, the rate-limit threshold and the attack threshold are not
configured.
Command
mode
Interface configuration mode.
Usage
The attack threshold value shall be equal to or greater